How to Use Barbicide Disinfecting Jar for Barber Tools
By The Razor Company | Published: 2026-10-23
Category: How-to Guides
Learn the correct way to use a Barbicide disinfecting jar for barber tools, including mixing, soaking, and maintenance steps for salon hygiene.
Quick answer
Use a Barbicide disinfecting jar by filling it with the correct water-to-concentrate ratio, fully submerging tools for the required contact time, then rinsing and drying them before reuse.
Why use a dedicated disinfecting jar
A dedicated disinfecting jar keeps your sanitation routine consistent and visible. The classic faceted glass jar with a silver lid has been a barbershop symbol for 75 years because it lets you see at a glance that tools are soaking in active solution. Using a jar designed for this purpose also prevents spills and ensures tools are fully submerged.
Choosing the right size for your workspace
The Barbicide Disinfecting Jar – Large Size has a base diameter of 4 1/4 inches and stands 11 1/2 inches tall, with a capacity of 37 fluid ounces (1.09 liters). That size comfortably holds multiple combs, shears, or clipper blades at once. If your station is tight, the large jar still fits on most countertops without crowding your workspace.
How to use the Barbicide disinfecting jar
- Prepare the solution: Fill the jar with cool tap water to the fill line (or about three-quarters full). Add Barbicide concentrate according to the label ratio—typically 2 ounces of concentrate per gallon of water. Stir gently with a clean tool. Never use hot water; it can reduce the disinfectant's effectiveness.
- Submerge tools completely: Place clean, pre-washed tools into the jar so they are fully covered by the solution. Avoid overcrowding—tools should not stack above the liquid surface. Close the silver lid to prevent evaporation and contamination. Tools with hinges (like shears) should be opened while submerged to allow solution into the joint.
- Soak for the required contact time: Leave tools in the solution for at least 10 minutes—longer if the manufacturer recommends a different contact time. Do not rush this step; shorter soak times may not fully disinfect. Set a timer so you don't forget. The jar's transparent glass makes it easy to check without opening the lid.
- Remove, rinse, and dry: Using clean tongs or gloved hands, remove each tool from the solution. Rinse thoroughly under cool running water to remove any chemical residue. Pat dry with a clean towel or allow to air dry on a sanitized surface. Never return wet tools to storage; moisture promotes rust and bacterial growth.
- Replace the solution regularly: Change the Barbicide solution every 24 hours or sooner if it becomes visibly cloudy or heavily soiled. Rinse the jar with hot water and mild soap before refilling. A fresh solution is clear and has a distinct blue color. If the color fades, it's time for a change.
Product facts
- Barbicide Disinfecting Jar - Large Size: The Barbicide Disinfecting Jar – Large Size has a capacity of 37 fl. oz. (1.09 L) and a base diameter of 4 1/4 inches. This size is large enough to submerge multiple barber tools at once, saving you time during busy hours.
Barbicide Disinfecting Jar - Large Size
