Leaf Razor Stand & Shower Holder: Mounting Guide

Quick answer

Mount the Leaf Shower Holder on a clean, dry tile or glass surface using the included adhesive pad, then pair it with a countertop stand like the Merkur Safety Razor & Shaving Brush Stand for complete storage.

How to mount the Leaf Shower Holder and set up a razor stand

1. Choose your mounting surface: Select a smooth, non-porous area like glazed tile, glass, or acrylic. Avoid drywall, wood, or textured tile—the adhesive won't bond well. A common mistake is mounting on porous tile; the holder may fall within days.
2. Clean and dry the surface: Wipe the area with isopropyl alcohol using a lint-free cloth. Let it dry completely for at least 2 minutes. Any residue or moisture weakens the adhesive. Skipping the alcohol step is the top reason for adhesive failure.
3. Peel and stick the holder: Remove the paper backing from the adhesive pad on the Leaf Shower Holder. Press it firmly against the cleaned surface and hold for 30 seconds. Apply even pressure across the entire pad. Hold the full 30 seconds—shorter pressing can leave gaps that let moisture loosen the bond.
4. Wait before hanging your razor: Allow the adhesive to cure for at least 24 hours before placing any weight on the holder. During this time, keep the area dry. Hanging a razor too soon is the most common mistake; the holder may slide off before the adhesive fully sets.
5. Set up a countertop stand (optional): If you prefer a freestanding option, place the Merkur Safety Razor & Shaving Brush Stand on a dry, level counter. Insert your safety razor into the top slot and your brush into the adjacent opening. No installation needed—just ensure the base is stable and the stand is wiped dry after use to prevent water spots on the chrome finish.

Product facts

• Leaf - Shower Holder - Chrome: The Leaf Shower Holder uses an adhesive pad—simply peel the backing and stick it on a dry, alcohol-cleaned surface. No drilling or tools needed, but you must prep the surface properly to avoid the holder falling off after a few showers.

  

• Merkur - Safety Razor & Shaving Brush Stand: The Merkur Safety Razor & Shaving Brush Stand is precision crafted from steel with a bright chrome electroplated finish. It holds one razor and one brush securely, letting both dry upright—ideal if you don't want to stick anything to your wall.