Start with the lock, not the look
The Boker Plus lineup in this store gives you two lock systems and three distinct builds. The OTF (out-the-front) model uses a sliding action, while the two linerlock models open with a thumb stud and lock via a liner that presses against the blade tang. That single difference shapes how the knife feels in hand, how you open it, and what kind of daily tasks it suits.
Below, the three knives are compared on the details the catalog actually confirms: blade steel, handle material, overall length, blade length, weight, and lock type. Where a spec is missing, that is noted as a decision limitation rather than filled in with a guess.
Three Boker Plus knives at a glance
- Boker Plus OTF D2 Gray Aluminum: OTF lock, D2 blade, gray aluminum handle, 1.2 oz, 4.7 in overall, 1.8 in blade. The lightest and most compact of the three.
- Boker Plus Nitro-V Aluminum Linerlock: Linerlock, Nitro-V blade, aluminum handle, 3.2 oz, 6.9 in overall, 2.9 in blade. The largest blade and the only Nitro-V option.
- Boker Plus D2 Copper Linerlock: Linerlock, D2 blade, copper handle, 3.2 oz, 4.8 in overall, 2 in blade. The only copper-handle option and the heaviest per inch.
OTF vs linerlock: what changes in daily use
An OTF knife opens by pushing the slider forward and closes by pulling it back. There is no thumb stud to flick, and the blade travels straight out of the handle. That makes the Boker Plus OTF a natural fit for one-handed opening in tight spaces, but it also means the mechanism has more internal parts than a linerlock. The catalog does not specify a maintenance schedule or a disassembly procedure for the OTF, so treat it as a knife to keep clean and dry rather than one to take apart.
A linerlock opens with a thumb stud and locks via a spring-loaded liner that moves behind the blade tang. The Boker Plus Nitro-V and D2 Copper models both use this system. Linerlocks are simpler to inspect: you can see the lock engagement when the blade is open, and there is no sliding track to collect lint. If you prefer a traditional folding knife feel, the linerlock models are the closer match.
What the OTF record confirms
- Boker Plus Pocket Knife OTF D2 Gray Aluminum Handle: Lock: OTF; Blade Material: D2; Handle: gray aluminum; Weight: 1.2 oz; Overall Length: 4.7 in; Blade Length: 1.8 in. At 1.2 oz and 4.7 in overall, this is the lightest and shortest of the three. The D2 steel is noted for edge retention, which suits a small blade used for light, repeated cutting.

Boker Plus Pocket Knife OTF D2 Gray Aluminum Handle - Boker Plus Pocket Knife OTF D2 Gray Aluminum Handle: Usage Warning: FOR EXTERNAL USE ONLY. This is a cutting tool, not a pry bar or a defensive weapon. Keep the blade for opening packages, cutting cord, and similar everyday tasks.
What the linerlock records confirm
- Boker Plus Pocket Knife Nitro V Aluminum Handle Linerlock: Lock: Linerlock; Blade Material: Nitro-V; Handle: aluminum; Designer: Joe Mangiafico; Weight: 3.2 oz; Overall Length: 6.9 in; Blade Length: 2.9 in. This is the largest blade in the group. Nitro-V is described as balancing corrosion resistance and edge retention, which matters if you carry in humid conditions or cut materials that promote rust.

Boker Plus Pocket Knife Nitro V Aluminum Handle Linerlock - Boker Plus Pocket Knife D2 Copper Handle Linerlock: Lock: Linerlock; Blade Material: D2; Handle: copper; Designer: Darriel Caston; Weight: 3.2 oz; Overall Length: 4.8 in; Blade Length: 2 in. The copper handle will develop a patina over time, so each knife takes on its own look. D2 is noted for edge retention, and the 2 in blade keeps the knife compact for pocket carry.
Blade steel: D2 vs Nitro-V
D2 appears on the OTF and the copper linerlock. The catalog describes it as known for strong edge retention. That is useful if you want to go longer between sharpenings, but D2 is not described here as a stainless steel, so it deserves a wipe-down after damp use. The catalog does not supply a corrosion-resistance rating for either steel.
Nitro-V appears only on the aluminum linerlock. The catalog describes it as valued for a balance of corrosion resistance and edge retention. If you live in a humid climate, work outdoors, or often cut fruit and damp cardboard, that balance is the more practical choice on paper. Neither steel has a supplied hardness rating or a sharpening angle in the record, so follow the manufacturer's guidance for sharpening rather than a number from this article.
Handle material: aluminum vs copper
The gray aluminum handle on the OTF and the aluminum handle on the Nitro-V linerlock keep both knives light and resistant to visible wear. The OTF weighs 1.2 oz, while the Nitro-V linerlock weighs 3.2 oz despite being the longest knife here. Aluminum is the low-maintenance choice if you want the knife to look the same after a year of pocket carry.
The copper handle on the D2 linerlock is the opposite proposition. The catalog states that copper will naturally develop a unique patina over time, giving each knife its own character. That is a feature, not a defect, but it means the knife will change appearance with use. If you want a consistent look, choose aluminum. If you like the idea of a handle that ages with you, copper is the reason to pick this model.
Match the knife to how you carry
- You want the smallest, lightest pocket knife: The OTF D2 Gray Aluminum is 1.2 oz with a 1.8 in blade and 4.7 in overall length. It disappears in a pocket and handles light cutting tasks.
- You want the largest blade for heavier everyday cutting: The Nitro-V Aluminum Linerlock has a 2.9 in blade and 6.9 in overall length. It is the biggest knife in this group and the one to choose if blade length matters more than compactness.
- You want a distinctive handle that ages: The D2 Copper Linerlock has a 2 in blade, 4.8 in overall length, and a copper handle that develops a patina. It is the style-forward choice.
- You want the simplest mechanism to inspect: Both linerlock models expose the lock bar when open. The OTF's sliding track is not described in the catalog, so there is no supplied cleaning routine for it.
Specs the catalog does not settle
The records do not list a country of origin for any of the three knives; each says 'Made in: Not specified.' They also do not supply a blade hardness, a sharpening angle, a pocket clip specification, or a lock-strength rating. None of that should stop you from choosing based on lock type, steel, handle material, and size, but do not assume a feature that is not listed.
One more limitation: the OTF record does not include a maintenance or disassembly procedure, and the linerlock records do not include one either. Keep the knives clean and dry, and follow any manufacturer instructions that come in the box. The catalog also carries a general usage warning of 'FOR EXTERNAL USE ONLY' and a note to discontinue use if irritation occurs, which is standard safety language for a cutting tool rather than a care instruction.




